74ACT16863DL.A中文資料德州儀器數(shù)據(jù)手冊PDF規(guī)格書

Members of the Texas Instruments

WidebusE Family

Inputs Are TTL-Voltage Compatible

3-State Outputs Drive Bus Lines Directly

Flow-Through Architecture Optimizes

PCB Layout

Distributed VCC and GND Pin Configuration

Minimizes High-Speed Switching Noise

EPICE (Enhanced-Performance Implanted

CMOS) 1-mm Process

500-mA Typical Latch-Up Immunity at

125°C

Package Options Include Plastic 300-mil

Shrink Small-Outline (DL) Packages Using

25-mil Center-to-Center Pin Spacings and

380-mil Fine-Pitch Ceramic Flat (WD)

Packages Using 25-mil Center-to-Center

Pin Spacings

description

The ’ACT16863 are 18-bit noninverting

transceivers designed for asynchronous

communication between data buses. The

control-function implementation minimizes

external timing requirements.

The ’ACT16863 can be used as two 9-bit

transceivers or one 18-bit transceiver. They allow

data transmission from the A bus to the B bus or

from the B bus to the A bus, depending on the logic

level at the output-enable (OEAB or OEBA)

inputs.

The 74ACT16863 is packaged in TI’s shrink small-outline package (DL), which provides twice the I/O pin count

and functionality of standard small-outline packages in the same printed-circuit-board area.

The 54ACT16863 is characterized for operation over the full military temperature range of –55°C to 125°C. The

74ACT16863 is characterized for operation from –40°C to 85°C.