ADP5033ACBZ-1-R7集成電路（IC）的線性穩壓器控制器規格書PDF中文資料

ADP5033ACBZ-1-R7屬于集成電路（IC）的線性穩壓器控制器。由亞德諾半導體技術有限公司制造生產的ADP5033ACBZ-1-R7穩壓器 - 線性 + 開關此產品族中的產品用于構建執行 DC-DC 轉換或電壓調節功能的電路，采用的是開關模式和線性穩壓器功能的組合。雖然具體的拓撲各不相同，但此類產品的主要目的是將開關模式技術的效率優勢與線性穩壓技術的低噪聲特性結合在一起。

GENERAL DESCRIPTION

The ADP5033 combines two high performance buck regulators and two low dropout regulators (LDO) in a tiny, 16-ball, 2 mm × 2 mm WLCSP to meet demanding performance and board space requirements.

The two bucks operate out of phase to reduce the input capacitor requirement and noise.

The low quiescent current, low dropout voltage, and wide input voltage range of the ADP5033 LDO extend the battery life of portable devices. The ADP5033 LDOs maintain power supply rejection greater than 60 dB for frequencies as high as 10 kHz while operating with a low headroom voltage.

The regulators in the ADP5033 are activated by the ENA and ENB pins. The specific channels controlled by ENA and ENB are set by factory programming. A high voltage level applied to the enable pins activates the regulators. The default output voltages are factory programmable and can be set to a wide range of options.

FEATURES

Main input voltage range: 2.3 V to 5.5 V

Two 800 mA buck regulators and two 300 mA LDOs

Tiny, 16-ball, 2 mm × 2 mm WLCSP package

Regulator accuracy: ±3

Factory programmable VOUTx

3 MHz buck operation with forced PWM and auto PWM/PSM modes

BUCK1/BUCK2: output voltage range from 0.8 V to 3.3 V

LDO1/LDO2: output voltage range from 0.8 V to 3.3V

LDO1/LDO2: low input supply voltage from 1.7 V to 5.5 V

LDO1/LDO2: high PSRR and low output noise

APPLICATIONS

Power for processors, ASICS, FPGAs, and RF chipsets

Portable instrumentation and medical devices

Space constrained devices