ALC5620

I2S Audio Codec + Voice PCM Interface; High Performance I2S Codec \n\n16-bit stereo DAC SNR 90dB, THD+N -85dB \n16-bit stereo ADC SNR 85dB, THD+N -80dB \nSupports I2S/PCM input and output interface \nOne analog stereo input (LINE-IN) \nOne analog MONO single-ended or differential input (PHONE and PHONEN input) \nStereo, single-ended MONO, or differential analog microphone inputs, with boost pre-amplifiers (+20/+30/+40dB) \nBTL (Bridge-Tied Load) Max. output with on-chip 1W speaker driver (SPKVDD=5V, 8Ω load) \nStereo headphone output with on-chip 45mW headphone driver (HPVDD=3.3V, 16Ω load) \n25mW SE or 75mW BTL MONO output support (AVDD=3.3V, 32Ω load) \nMicrophone switch detection \nIntegrated 16-bit I2S/PCM interface voice DAC for blue-tooth and other external devices \nPower management and enhanced power saving \nSupports digital 5 band equalizer (EQ) \nSupports digital spatial sound and pseudo stereo effect \nSupports pop noise suppression \nInternal PLL can receive wide range of clock input (Digital IO power > 2.3V) \nDigital power supplies from 1.8V to 3.6V, speaker amplifier power supplies from 2.3V to 5V \nAnalog power and headphone power supplies from 2.3V to 3.6V \n7 x 7mm 48-pin QFN package;

The ALC5620 is a highly-integrated dual I2S/PCM interface audio codec with multiple input/output ports and is designed for mobile computing and communications. It provides a dual-channel Hi-Fi codec for playback, and dual-channel ADC for recording via an I2S interface. In addition, an Independent Voice DAC is provided with PCM interface for Bluetooth applications. \nBoth Stereo audio and voice functions are supported via the I2S/PCM configurable interface. To reduce component count, the device can connect directly to: MONO or stereo differential analog inputs Stereo headphone Single-end or BTL MONO output MONO or Stereo Bridge-Tied Load (BTL) speaker \nMultiple analog input and output pins are provided for seamless integration with analog connected wireless communication devices. Differential input/output connections efficiently reduce noise interference, providing better sound quality. Class-AB or Class-D amplifiers are easily swapped via simple register configuration, and the 1 Watt speaker removes the need for an additional amplifier, further cutting both cost and required board area. Additionally, a flexible hardware 5-band equalizer with configurable gain, bandwidth, and center frequency, and enriches the sound experience. \nThe ALC5620 operates at supply voltages from 1.8 to 5 Volts. To extend battery life, each section of the device can be powered down individually under software control. Leakage current in maximum power saving state is less than 10μA.\nThe ALC5620 is available in a 7x7mm ‘Green’ QFN package, making it ideal for use in handheld portable systems.

ALC5620

I2S AUDIO CODEC VOICE PCM INTERFACE

ALC5620-GR

I2S AUDIO CODEC VOICE PCM INTERFACE

AMMC-5620

6-20GHzHighGainAmplifier

Description AvagoTechnologies’AMMC-5620MMICisaGaAswidebandamplifierdesignedformediumoutputpowerandhighgainoverthe6-20GHzfrequencyrange.The3cascadedstagesprovidehighgainwhilethesinglebiassupplyofferseaseofuse.ItisfabricatedusingaPHEMTintegratedcircui

AMMC-5620

6-20GHzHighGainAmplifier

AMMC-5620

AgilentAMMC-5620,6-20GHzHighGainAmplifier

Description Agilent’sAMMC-5620MMICisaGaAswide-bandamplifierdesignedformediumoutputpowerandhighgainoverthe6?20GHzfrequencyrange.The3cascadedstagesprovidehighgainwhilethesinglebiassupplyofferseaseofuse.ItisfabricatedusingaPHEMTintegratedcircuitproce

AMMP-5620

620GHzHighGainAmplifierinSMTPackage

AMMP-5620

6??20GHzHighGainAmplifierinSMTPackage

AMMP-5620-BLKG

620GHzHighGainAmplifierinSMTPackage

AMMP-5620-BLKG

6??20GHzHighGainAmplifierinSMTPackage