AMC1411

具有高 CMTI、用于電流感應的 2V 輸入增強型隔離放大器; ? 優化了 2V 高阻抗輸入電壓范圍，可實現隔離式電壓測量\n? 固定增益：1.0 V/V\n? 低直流誤差： \n? 失調電壓誤差 ±1.5mV（最大值）\n? 溫漂：±10μV/°C（最大值）\n? 增益誤差：±0.2%（最大值）\n? 增益漂移：±30ppm/°C（最大值）\n? 非線性 0.04%（最大值）\n \n? 高側和低側以 3.3V 或 5V 電壓運行\(zhòng)n? 高側電源缺失檢測功能\n? 高 CMTI：100kV/μs（最小值）\n? ≥15.7mm 爬電距離，擴展型 SOIC 封裝\n? 增強隔離型： \n? 10600-VPK 增強型隔離，符合 DIN VDE V 0884-11：2017-01\n? 符合 UL1577 標準且長達 1 分鐘的 7500VRMS 隔離\n \n? 可在工業級工作溫度范圍內正常工作：–40°C 至 +125°C;

AMC1411 是一款隔離式精密放大器，此放大器的輸出與輸入電路由抗電磁干擾性能極強的電容隔離層隔開。該隔離層經認證可提供高達 7.5kVRMS 的增強型電隔離，符合 VDE V 0884-11 和 UL1577 標準，并且可支持最高 1600VRMS 的工作電壓。\n\n該隔離層可將系統中以不同共模電壓電平運行的各器件隔開，防止高電壓沖擊導致低壓側器件電氣損壞或?qū)Σ僮鲉T造成傷害。\n\n AMC1411 的高阻抗輸入針對與高阻抗電阻分壓器或其他高阻抗電壓信號源的連接進行了優化。出色的直流精度和低溫漂移支持精確的電壓檢測，適用于直流/直流轉換器、太陽能或風力渦輪機逆變器、交流電機驅動器或其他必須在高電壓、高海拔或高度污染環境下運行的應用。\n\n AMC1411 的工業工作溫度范圍為 –40°C 至 +125°C，支持低至 -55°C 的工作溫度。

AMC1411

AMC1411 High-Impedance, 2-V Input, Reinforced Isolated Amplifier in a 15-mm Stretched SOIC Package

AMC1411

AMC1411 High-Impedance, 2-V Input, Reinforced Isolated Amplifier in a 15-mm Stretched SOIC Package

AMC1411

AMC1411-Q1 Automotive, High-Impedance, 2-V Input, Reinforced Isolated Amplifier in a 15-mm Stretched SOIC Package

AMC1411-Q1

具有高 CMTI、用于電流感應的汽車類 2V 輸入增強型隔離放大器; ? AEC-Q100 qualified for automotive applications: \n? Temperature grade 1: –40°C to +125°C, TA \n \n? Functional Safety-Capable \n? Documentation available to aid functional safety system design \n \n? 2-V, high-impedance input voltage range optimized for isolated voltage measurements\n? Fixed gain: 1.0 V/V\n? Low DC errors: \n? Offset error ±1.5 mV (max)\n? Offset drift: ±10 μV/°C (max)\n? Gain error: ±0.2% (max)\n? Gain drift: ±30 ppm/°C (max)\n? Nonlinearity 0.04% (max)\n \n? 3.3-V or 5-V operation on high-side and low-side\n? Missing high-side supply detection feature\n? High CMTI: 100 kV/μs (min)\n? ≥15.7-mm creepage, stretched SOIC package\n? Reinforced isolation: \n? 10600-VPK reinforced isolation per DIN VDE V 0884-11: 2017-01\n? 7500-VRMS isolation for 1 minute per UL1577;

The AMC1411-Q1 is a precision, isolated amplifier with an output separated from the input circuitry by a capacitive isolation barrier that is highly resistant to magnetic interference. This barrier is certified to provide reinforced galvanic isolation of up to 7.5?kVRMS according to VDE V 0884-11 and UL1577 and supports a working voltage of up to 1600 VRMS.\n\nThe isolation barrier separates parts of the system that operate on different common-mode voltage levels and protects the low-voltage side from voltages that can cause electrical damage or be harmful to an operator.\n\nThe high-impedance input of the AMC1411-Q1 is optimized for connection to high-impedance resistive dividers or other high-impedance voltage signal source. The excellent DC accuracy and low temperature drift support accurate, isolated voltage sensing in onboard chargers (OBC), DC/DC converters, traction inverters, or other applications that must operate at high common-mode voltages, high altitudes, or in environments with high pollution degrees. \n\nThe AMC1411-Q1 is offered in a stretched 8-pin SOIC package and is AEC-Q100 qualified for automotive applications and supports the temperature range from –40°C to +125°C.

AMC1411_V01

AMC1411 High-Impedance, 2-V Input, Reinforced Isolated Amplifier in a 15-mm Stretched SOIC Package

AMC1411DWLR

絲印：1411；Package：SOIC；AMC1411 High-Impedance, 2-V Input, Reinforced Isolated Amplifier in a 15-mm Stretched SOIC Package

AMC1411-Q1

AMC1411-Q1 Automotive, High-Impedance, 2-V Input, Reinforced Isolated Amplifier in a 15-mm Stretched SOIC Package

AMC1411QDWLRQ1

絲印：1411Q；Package：SOIC；AMC1411-Q1 Automotive, High-Impedance, 2-V Input, Reinforced Isolated Amplifier in a 15-mm Stretched SOIC Package

AMC1411EVM

包裝：盒 類別：開發板，套件，編程器 評估板 - 運算放大器 描述：EVAL BOARD FOR AMC1411