AT93C46A-10TI-2.5中文資料愛特梅爾數據手冊PDF規格書

Description

The AT93C46A provides 1024 bits of serial electrically-erasable programmable read only memory (EEPROM) organized as 64 words of 16 bits each. The device is optimized for use in many automotive applications where low-power and low-voltage operation are essential. The AT93C46A is available in space-saving 8-lead JEDEC SOIC and 8-lead TSSOP packages.

The AT93C46A is enabled through the Chip Select pin (CS) and accessed via a three-wire serial interface consisting of Data Input (DI), Data Output (DO), and Shift Clock (SK). Upon receiving a Read instruction at DI, the address is decoded and the data is clocked out serially on the data output pin DO. The write cycle is completely self-timed and no separate erase cycle is required before write. The write cycle is only enabled when the part is in the erase/write enable state. When CS is brought high following the initiation of a write cycle, the DO pin outputs the ready/busy status of the part.

The AT93C46A is available in 2.7V to 5.5V versions.

Features

? Low-voltage and Standard-voltage Operation

– 2.7 (VCC = 2.7V to 5.5V)

? Three-wire Serial Interface

? 2 MHz Clock Rate Compatibility

? Self-timed Write Cycle (10 ms max)

? High Reliability

– Endurance: 1 Million Write Cycles

– Data Retention: 100 Years

? Lead-free/Halogen-free Devices Available

? 8-lead JEDEC SOIC and 8-lead TSSOP Packages