CDCM7005HFGSLASHEM.Z中文資料德州儀器數(shù)據(jù)手冊PDF規(guī)格書

1 Features

1? High Performance LVPECL and LVCMOS PLL

Clock Synchronizer

? Two Reference Clock Inputs (Primary and

Secondary Clock) for Redundancy Support With

Manual or Automatic Selection

? Accepts LVCMOS Input Frequencies Up to

200 MHz

? VCXO_IN Clock is Synchronized to One of the

Two Reference Clocks

? VCXO_IN Frequencies Up to 2 GHz (LVPECL)

? Outputs can be a Combination of LVPECL and

LVCMOS (Up to Five Differential LVPECL Outputs

or Up to 10 LVCMOS Outputs)

? Output Frequency is Selectable by x1, /2, /3, /4,

/6, /8, /16 on Each Output Individually

? Efficient Jitter Cleaning from Low PLL Loop

Bandwidth

? Low Phase Noise PLL Core

? Programmable Phase Offset (PRI_REF and

SEC_REF to Outputs)

? Wide Charge Pump Current Range From

200 μA to 3 mA

? Analog and Digital PLL Lock Indication

? Provides VBB Bias Voltage Output for Single-

Ended Input Signals (VCXO_IN)

? Frequency Hold Over Mode Improves Fail-Safe

Operation

? Power-Up Control Forces LVPECL Outputs to Tri-

State at VCC < 1.5 V

? SPI Controllable Device Setting

? 3.3-V Power Supply

? High-Performance 52 Pin Ceramic Quad Flat

Pack (HFG)

? Rad-Tolerant : 50 kRad (Si) TID

? QML-V Qualified, SMD 5962-07230

? Military Temperature Range: –55°C to 125°C Tcase

? Engineering Evaluation (/EM) Samples are

Available

(1) These units are intended for engineering evaluation only.

They are processed to a non-compliant flow (for example, no

burn-in, and so forth) and are tested to temperature rating of

25°C only. These units are not suitable for qualification,

production, radiation testing or flight use. Parts are not

warranted for performance on full MIL specified temperature

range of –55°C to 125°C or operating life.

2 Applications

? Low-Jitter Clock Distribution

? SERDES Links

? Analog Data Converters

? Digital-to-Analog Converters

3 Description

The CDCM7005-SP is a high-performance, low

phase noise and low skew clock synchronizer that

synchronizes a VCXO (voltage controlled crystal

oscillator) or VCO (voltage controlled oscillator)

frequency to one of the two reference clocks. The

programmable pre-divider M and the feedbackdividers

N and P give a high flexibility to the

frequency ratio of the reference clock to VC(X)O as

VC(X)O_IN / PRI_REF = (N × P) / M or VC(X)O_IN /

SEC_REF = (N × P) / M.

VC(X)O_IN clock operates up to 2 GHz. Through the

selection of external VC(X)O and loop filter

components, the PLL loop bandwidth and damping

factor can be adjust to meet different system

requirements.