EVAL-ADUM4135EBZ開發板套件編程器的評估演示板及套件規格書PDF中文資料

EVAL-ADUM4135EBZ屬于開發板套件編程器的評估演示板及套件。由亞德諾半導體技術有限公司制造生產的EVAL-ADUM4135EBZ評估和演示板及套件該系列產品提供了一種方便的方法，在經過驗證的實施環境中評估某些重點器件的性能或特性。評估方法通常有完善的文檔說明，并且視乎具體情況由評估軟件提供支持。產品通常由印刷電路板組成，板上已裝有重點器件以及必要或有用的支持元器件，另外也可能包括其他組件，例如電纜或電源。對于數量特別多或類別獨特的器件類別(如 ADC、DAC 和開關模式電源)，評估平臺可組合為一個單獨的產品系列。

GENERAL DESCRIPTION

The ADuM4135 is a single-channel gate driver specifically optimized for driving insulated gate bipolar transistors (IGBTs). Analog Devices, Inc., iCoupler? technology provides isolation between the input signal and the output gate drive.

The ADuM4135 includes a Miller clamp to provide robust IGBT turn-off with a single-rail supply when the gate voltage drops below 2 V (typical). Operation with unipolar or bipolar secondary supplies is possible, with or without the Miller clamp operation.

The Analog Devices chip scale transformers also provide isolated communication of control information between the high voltage and low voltage domains of the chip. Information on the status of the chip can be read back from dedicated outputs. Control of resetting the device after a fault on the secondary is performed on the primary side of the device.

Integrated onto the ADuM4135 is a desaturation detection circuit that provides protection against high voltage short-circuit IGBT operation. The desaturation protection contains noise reducing features such as a 370 ns (typical) masking time after a switching event to mask voltage spikes due to initial turn-on. An internal 537 μA (typical) current source allows low device count and the internal blanking switch allows the addition of an external current source if more noise immunity is needed.

The secondary UVLO is set to 11.67 V (typical) with common IGBT threshold levels taken into consideration.

FEATURES

4 A peak drive output capability

Output power device resistance: <1 Ω

Desaturation protection

Isolated desaturation fault reporting

Soft shutdown on fault

Miller clamp output with gate sense input

Isolated fault and ready functions

Low propagation delay: 55 ns typical

Minimum pulse width: 50 ns

Operating temperature range: ?40°C to +125°C

Output voltage range to 30 V

Input voltage range from 2.5 V to 6 V

Output and input undervoltage lockout (UVLO)

Creepage distance: 7.8 mm minimum

100 kV/μs common-mode transient immunity (CMTI)

20 year lifetime for 600 V rms or 1092 V dc working voltage

Safety and regulatory approvals

5 kV ac for 1 minute per UL 1577

CSA Component Acceptance Notice 5A

DIN V VDE V 0884-10 (VDE V 0884-10):2006-12

VIORM = 849 V peak (reinforced/basic)

APPLICATIONS

MOSFET/IGBT gate drivers

PV inverters

Motor drives

Power supplies