LD1085CDT28中文資料意法半導體數(shù)據(jù)手冊PDF規(guī)格書

DESCRIPTION

The LD1085 is a LOW DROP Voltage Regulator able to provide up to 3A of Output Current. Dropout is guaranteed at a maximum of 1.5V at the maximum output current, decreasing at lower loads. The LD1085 is pin to pin compatible with the older 3-terminal adjustable regulators, but has better performances in term of drop and output tolerance.

A 2.85V output version is suitable for SCSI-2 active termination. Unlike PNP regulators, where a part of the output current is wasted as quiescent current, the LD1085 quiescent current flows into the load, so increase efficiency. Only a 10μF minimum capacitor is need for stability. The device is supplied in DPAK. On chip trimming allows the regulator to reach a very tight output voltage tolerance, within ±2 at 25°C.

■ TYPICAL DROPOUT 1.3V (AT 3A)

■ THREE TERMINAL ADJUSTABLE OR FIXED OUTPUT VOLTAGE 1.5V, 1.8V, 2.5V, 2.85V, 3.3V, 3.6V, 5V, 8V, 9V, 12V.

■ GUARANTEED OUTPUT CURRENT UP TO 3A

■ OUPUT TOLERANCE ±2 AT 25°C AND ±3 IN FULL TEMPERATURE RANGE

■ INTERNAL POWER AND THERMAL LIMIT

■ WIDE OPERATING TEMPERATURE RANGE -40°C TO 125°C

■ PACKAGE AVAILABLE : DPAK

■ PINOUT COMPATIBILITY WITH STANDARD ADJUSTABLE VREG