LT1030CD.A中文資料德州儀器數(shù)據(jù)手冊PDF規(guī)格書

Low Supply Voltage . . . ±5 V to ±15 V

Supply Current . . . 500 mA Typical

Zero Supply Current When Shut Down

Outputs Can Be Driven ±30 V

Output Open When Off (3-State)

10-mA Output Drive

Outputs of Several Devices Can Be

Connected in Parallel

Meets or Exceeds the Requirements of

ANSI EIA/TIA-232-F Specifications

Designed to Be Interchangeable With

Linear Technology LT1030

description

The LT1030C is an EIA/TIA-232-F line driver that operates over a ±5-V to ±15-V supply-voltage range on low

supply current. The device can be shut down to zero supply current. Current limiting fully protects the outputs

from externally applied voltages of ±30 V. Since the output swings to within 200 mV of the positive supply and

to within 1 V of the negative supply, supply-voltage requirements are minimized.

A major advantage of the LT1030C is the high-impedance output state when the device is off or powered down.

This feature allows several different drivers on the same bus.

The device can be used as an EIA/TIA-232-F driver, micropower interface, or level translator, among others.

The LT1030C is characterized for operation from 0°C to 70°C.