MAX383

Precision, Low-Voltage Analog Switches

GeneralDescription TheMAX381/MAX383/MAX385areprecision,low-voltageanalogswitches.Thesingle-polesingle-throwMAX381anddouble-polesingle-throwMAX385dualswitchesarenormallyopen.Thesingle-poledoublethrowMAX383hastwonormallyopenandtwonormallyclosedpoles.Allthreep

MAX383

高精度、低電壓、SPST、CMOS模擬開關; ? 單電源供電（+3V至+15V）\n\n? 雙極性電源供電（±3V至±8V）\n\n? 與DG401/DG403/DG405引腳兼容\n\n? 低導通電阻：20Ω（典型值）（最大值35Ω）\n\n? 確保通道間導通電阻匹配：< 2Ω\n\n? 在額定模擬信號范圍內確保平坦導通電阻：< 4Ω\n\n? 確保電荷注入(< 5pC)\n\n? +85°C時確保關斷通道漏電流<2.5nA\n\n? TTL/CMOS邏輯兼容，采用3V、5V、±3V和±5V電源\n\n? 軌到軌模擬信號處理能力;

MAX381/MAX383/MAX385均為精密、低壓模擬開關。單刀單擲MAX381和雙刀單擲MAX385雙通道開關為常開式。單刀雙擲MAX383具有兩個常開極和兩個常閉極。所有三個器件都提供低導通電阻（小于35Ω），確保通道間匹配為2Ω，并在額定模擬信號范圍內保持平坦（最大4Ω）。它們還提供低漏電流（+25°C時小于250pA，+85°C時小于2.5nA）和快速開關（開啟時間小于175ns，關閉時間小于100ns）。\n\n MAX381/MAX383/MAX385采用Maxim的低壓硅柵工藝制造，系統精度高。改進的設計實現了超低的電荷注入(< 5pC)和低功耗(< 10μW)。\n\n 這些單片開關采用單正電源（+3V至+15V）或雙電源（±3V至±8V）工作，同時保持CMOS邏輯輸入兼容性和快速開關。CMOS輸入有助于降低輸入負載。\n\n ?\n\n

MAX3831

+3.3V、2.5Gbps、SDH/SONET、4通道互連復用/解復用IC，帶有時鐘發生器; \n? +3.3V Single Supply \n? 1.45W Power Dissipation \n? 4-Channel Mux/Demux with Fully Integrated 2.488GHz Clock Generator \n? Frame Detection Maintains Channel Assignment \n? ±7.5ns Elastic Store Range \n? 2.5ps RMS Serial-Data Output Random Jitter \n? 8ps Serial Data Output Deterministic Jitter \n? 622Mbps LVDS Parallel Input/Output \n? 2.488Gbps Serial CML Input/Output \n? On-Chip Pattern Generator Provides High-Speed BIST \n? System Test Flexibility: System Loopback, Line Loopback \n? Loss-of-Frame Indicator;

The MAX3831/MAX3832 are 4:1 multiplexers (muxes) and 1:4 demultiplexers (demuxes) with automatic channel alignment. Operating from a single +3.3V supply, the mux receives four parallel, 622Mbps SDH/SONET channels. These channels are bit interleaved to generate a serial data stream of 2.488Gbps for interfacing to an optical or an electrical driver. A 10-bit-wide elastic buffer tolerates up to ±7.5ns skew between any parallel data input and the reference clock. An external 155MHz reference clock is required for the on-chip PLL to synthesize a high-frequency 2.488GHz clock for timing the outgoing data streams.\n The MAX3831/MAX3832's demux receives 2.488Gbps serial data and the 2.488GHz clock from an external clock/data recovery device (MAX3876), converting it to four 622Mbps LVDS outputs. The MAX3831 provides a 622MHz LVDS clock output, and the MAX3832 provides a 155MHz LVDS clock output. An internal frame detector looks for a 622Mbps SDH/SONET framing pattern and rolls the demux to maintain proper channel assignment at the outputs.\n These devices also include an embedded pattern generator that enables a full-speed, built-in self-test (BIST). Two different loopback modes provide system test flexibility. A TTL loss-of-frame monitor is included. The MAX3831/MAX3832 are available in 64-pin TQFP-EP (exposed paddle) packages and are specified over the upper commercial (0°C to +85°C) temperature range.

MAX3831

3.3V, 2.5Gbps, SDH/SONET, 4-Channel Interconnect Mux/Demux ICs with Clock Generator

GeneralDescription TheMAX3831/MAX3832are4:1multiplexers(muxes)and1:4demultiplexers(demuxes)withautomaticchan nelassignment.Operatingfromasingle+3.3Vsupply,themuxreceivesfourparallel,622MbpsSDH/SONET channels.Thesechannelsarebitinterleavedtogenerateaseri

MAX3831UCB

3.3V, 2.5Gbps, SDH/SONET, 4-Channel Interconnect Mux/Demux ICs with Clock Generator

GeneralDescription TheMAX3831/MAX3832are4:1multiplexers(muxes)and1:4demultiplexers(demuxes)withautomaticchan nelassignment.Operatingfromasingle+3.3Vsupply,themuxreceivesfourparallel,622MbpsSDH/SONET channels.Thesechannelsarebitinterleavedtogenerateaseri

MAX3832UCB

3.3V, 2.5Gbps, SDH/SONET, 4-Channel Interconnect Mux/Demux ICs with Clock Generator

GeneralDescription TheMAX3831/MAX3832are4:1multiplexers(muxes)and1:4demultiplexers(demuxes)withautomaticchan nelassignment.Operatingfromasingle+3.3Vsupply,themuxreceivesfourparallel,622MbpsSDH/SONET channels.Thesechannelsarebitinterleavedtogenerateaseri

MAX383B

高精度、低電壓、SPST、CMOS模擬開關; \n? Single-Supply Operation (+3V to +15V) \n? Bipolar-Supply Operation (±3V to ±8V) \n? Pin-Compatible with DG401/DG403/DG405 \n? Low On-Resistance, 20Ω Typical (35Ω Max) \n? Guaranteed Matched On-Resistance Between Channels, < 2Ω \n? Guaranteed Flat On-Resistance over Specified Analog Signal Range, < 4Ω \n? Guaranteed Charge Injection, < 5pC \n? Guaranteed Off-Channel Leakage, < 2.5nA at +85°C \n? TTL/CMOS-Logic Compatible with 3V, 5V, ±3V, and ±5V Supplies \n? Rail-to-Rail Analog Signal Handling Capability;

The MAX381/MAX383/MAX385 are precision, low-voltage analog switches. The single-pole single-throw MAX381 and double-pole single-throw MAX385 dual switches are normally open. The single-pole double-throw MAX383 has two normally open and two normally closed poles. All three parts offer low on-resistance (less than 35Ω), guaranteed to match to within 2Ω between channels and to remain flat over the specified analog signal range (4Ω max). They also offer low leakage (less than 250pA at +25°C and less than 2.5nA at +85°C) and fast switching (turn-on time less than 175ns and turn-off time less than 100ns).\n The MAX381/MAX383/MAX385 are fabricated with Maxim's low-voltage silicon-gate process for high system accuracy. Design improvements guarantee extremely low charge injection (< 5pC) and low power consumption (< 10μW).\n These monolithic switches operate with a single positive supply (+3V to +15V) or with split supplies (±3V to ±8V) while retaining CMOS-logic input compatibility and fast switching. CMOS inputs provide reduced input loading.

MAX383C/D

Precision, Low-Voltage Analog Switches

GeneralDescription TheMAX381/MAX383/MAX385areprecision,low-voltageanalogswitches.Thesingle-polesingle-throwMAX381anddouble-polesingle-throwMAX385dualswitchesarenormallyopen.Thesingle-poledoublethrowMAX383hastwonormallyopenandtwonormallyclosedpoles.Allthreep

MAX383CPE

Precision, Low-Voltage Analog Switches

GeneralDescription TheMAX381/MAX383/MAX385areprecision,low-voltageanalogswitches.Thesingle-polesingle-throwMAX381anddouble-polesingle-throwMAX385dualswitchesarenormallyopen.Thesingle-poledoublethrowMAX383hastwonormallyopenandtwonormallyclosedpoles.Allthreep

MAX383CSE

Precision, Low-Voltage Analog Switches

GeneralDescription TheMAX381/MAX383/MAX385areprecision,low-voltageanalogswitches.Thesingle-polesingle-throwMAX381anddouble-polesingle-throwMAX385dualswitchesarenormallyopen.Thesingle-poledoublethrowMAX383hastwonormallyopenandtwonormallyclosedpoles.Allthreep