MC623中文資料安森美半導體數(shù)據(jù)手冊PDF規(guī)格書

3.0 V, Dual Trip Point Temperature Sensor

The MC623 is a 3V solid–state, programmable temperature sensor designed for use in thermal management applications. It features dual thermal interrupt outputs (LOW LIMIT and HIGH LIMIT) each of which program with a single external resistor. The HIGH LIMIT and LOW LIMIT outputs are driven active (high) when measured temperature exceeds the user–programmed limits. The CONTROL output is driven active (high) when temperature exceeds the HIGH LIMIT setpoint, and turned off when temperature falls below the LOW LIMIT setpoint. The CONTROL output can be used to provide simple ON/OFF control to a cooling fan if so desired.

Low voltage operation, easy setpoint programming, small size and low cost make the MC623 an ideal choice for many thermal management applications.

Features

? Integrated Temperature Sensor and Detector Operate from a Supply Voltage as Low as 2.7V

? Replaces Mechanical Thermostats and Switches

? On–Chip Temperature Sense

? 8–Pin SOIC for Direct PCB Mounting

? 2 User–Programmable Temperature Set Points

? 2 Independent Temperature Limit Outputs

? Heat/Cool Regulate Output

? Operating Temperature Range: –40°C to +85°C

Typical Applications

? CPU Thermal Management

? System Over–or Under–Temperature Shutdown

? Advanced Thermal Warning

? Fan Speed Control Circuits

? Accurate Appliance Temperature Sensing

? Environmental Control