MPQ6610集成電路（IC）的電機驅動器控制器規格書PDF中文資料

MPQ6610屬于集成電路（IC）的電機驅動器控制器。由美國芯源系統有限公司制造生產的MPQ6610電機驅動器，控制器產品屬于電機驅動器和控制器電源管理集成電路 (PMIC) 系列，可用于控制或操作從某電源施加到電機或相關機電執行器的電源。所實現的具體功能和特性集根據預期負載和預期應用的特性有很大差異，范圍從用于有刷電機的簡單開環速度控制到基于步進電機的高級閉環運動控制。

DESCRIPTION

The MPQ6610 is a half-bridge driver with

current measurement and regulation features. It

can operate from a 4V to 55V supply voltage,

and can deliver up to 3A of output current

(depending on the package, PCB design, and

ambient temperature). The MPQ6610 can be

used to drive brushed DC motors, solenoids, or

other loads.

An internal current-sense circuit provides an

output with a voltage that is proportional to the

load current. Cycle-by-cycle current regulation

and limiting are also provided. These features

do not require the use of a low-Ohmic shunt

resistor.

Internal diagnostic and protection features

include open-load detection, over-current

protection (OCP), under-voltage lockout

(UVLO), and thermal shutdown.

The MPQ6610 is available in 8-pin TSOT23

and SOIC-8 packages. Note that due to the

small pin spacing, the TSOT23 package is only

recommended for applications up to 45V,

unless conformal coating or encapsulation is

used.

FEATURES

? Wide 4V to 55V Input Voltage Range

? 3A Maximum Output Current

? Internal Half-Bridge Driver

? Cycle-by-Cycle Current Regulation/Limiting

? Low On Resistance (High Side: 100mΩ,

Low Side: 120mΩ)

? No Control Power Supply Required

? Simple, Versatile Logic Interfaces

? Inputs Compatible with 2.5V, 3.3V, and 5V

Logic

? Over-Current Protection (OCP)

? Open-Load Detection

? Thermal Shutdown

? Under-Voltage Lockout (UVLO)

? Fault Indication Output

? Thermally Enhanced Package

? Available in TSOT23 and SOIC-8 Packages

? Available in AEC-Q100 Grade 1

APPLICATIONS

? Solenoid Drivers

? Relay Drivers

? Brushed DC Motor Drivers