P89C61X2BBDSLASH00中文資料飛利浦?jǐn)?shù)據(jù)手冊(cè)PDF規(guī)格書

DESCRIPTION

The Philips microcontrollers described in this data sheet are high-performance static 80C51 designs. They are manufactured in an advanced CMOS process and contain a non-volatile Flash program memory that is programmable in parallel (via a parallel programmer) or In-System Programmable (ISP) via boot loader. They support both 12-clock and 6-clock operation.

FEATURES

?80C51 Central Processing Unit

–64 kbytes Flash

–512 bytes RAM (P89C60X2)

–1024 bytes RAM (P89C61X2)

–Boolean processor

–Fully static operation

?In-System Programmable (ISP) Flash memory

?12-clock operation with selectable 6-clock operation (via software or via parallel programmer)

?Memory addressing capability

–Up to 64 kbytes ROM and 64 kbytes RAM

?Power control modes:

–Clock can be stopped and resumed

–Idle mode

–Power-down mode

?Two speed ranges

–0 to 20 MHz with 6-clock operation

–0 to 33 MHz with 12-clock operation

?LQFP, PLCC, and DIP packages

?Dual Data Pointers

?Three security bits

?Four interrupt priority levels

?Six interrupt sources

?Four 8-bit I/O ports

?Full-duplex enhanced UART

–Framing error detection

–Automatic address recognition

?Three 16-bit timers/counters T0, T1 (standard 80C51) and additional T2 (capture and compare)

?Programmable clock-out pin

?Watchdog timer

?Asynchronous port reset

?Low EMI (inhibit ALE, 6-clock mode)

?Wake-up from Power Down by an external interrupt