SN74F543DWR.A中文資料德州儀器數(shù)據(jù)手冊PDF規(guī)格書

? 3-State True Outputs

? Back-to-Back Registers for Storage

? Package Options Include Plastic

Small-Outline and Shrink Small-Outline

Packages and Standard Plastic 300-mil

DIPs

description

The SN74F543 octal transceiver contains two

sets of D-type latches for temporary storage of

data flowing in either direction. Separate

latch-enable (LEAB or LEBA) and output enable

(OEAB or OEBA) inputs are provided for each

register to permit independent control in either

direction of data flow. The A outputs are

characterized to sink 24 mA while the B outputs

are characterized to sink 64 mA.

The A-to-B enable (CEAB) input must be low in order to enter data from A or to output data from B. Having CEAB

low and LEAB low makes the A-to-B latches transparent; a subsequent low-to-high transition of LEAB puts the

A latches in the storage mode. With CEAB and OEAB both low, the 3-state B outputs are active and reflect the

data present at the output of the A latches. Data flow from B to A is similar, but requires using the CEBA, LEBA,

and OEBA inputs.

The SN74F543 is available in TI’s shrink small-outline package (DB), which provides the same I/O pin count

and functionality of standard small-outline packages in less than half the printed-circuit-board area.

The SN74F543 is characterized for operation from 0°C to 70°C.