TDA8006

Multiprotocol IC Card coupler;

It is assumed that the reader of this data sheet is familiar with ISO 7816.\n\nThe TDA8006 is controlled either through a standard serial interface or a parallel bus, it takes care of all ISO 7816, EMV and GSM11.11 requirements. It gives the card and the set a very high level of security due to its special hardware against ESD, short circuit, power failure, etc.\n\nIts integrated step-up converter allows operation within a supply voltage range of 4.2 to 6 V.\nA special version of the TDA8006 is available which has its internal connections to the controller accessible through external pins. This allows easy development and evaluation when used with a 80CL580 microcontroller or a development tool. An emulation board is available.\n\nA software library has been developed, taking care of all actions required for T = 0, T = 1 and synchronous protocols. This library may be either linked with the application software before masking, or masked in the internal ROM (see “Application Note AN98106”).

TDA8006

Multiprotocol IC Card coupler

TDA8006AH

Multiprotocol IC Card coupler

TDA8006AH/C1

Multiprotocol IC Card coupler

TDA8006AH/C2

Multiprotocol IC Card coupler

TDA8006AH/C3

Multiprotocol IC Card coupler

TDA8006AHSLASHC1

Multiprotocol IC Card coupler

TDA8006AHSLASHC2

Multiprotocol IC Card coupler

TDA8006AHSLASHC3

Multiprotocol IC Card coupler

TDA8006H

Multiprotocol IC Card coupler