TPA2001D2PWP.A中文資料德州儀器數據手冊PDF規格書

Modulation Scheme Optimized to Operate

Without a Filter

1 W Into 8-W Speakers (THD+N< 0.4%)

< 0.08% THD+N at 0.5 W, 1 kHz, Into 8-W

Load

Extremely Efficient 3rd Generation 5-V

Class-D Technology:

– Low Supply Current (No Filter) . . . 8 mA

– Low Supply Current (Filter) . . . 15 mA

– Low Shutdown Current . . . 1 mA

– Low Noise Floor . . . 56 mVRMS

– Maximum Efficiency Into 8 W, 75 – 85%

– 4 Internal Gain Settings . . . 8 – 23.5 dB

– PSRR . . . –77 dB

Integrated Depop Circuitry

Short-Circuit Protection (Short to Battery,

Ground, and Load)

–40°C to 85°C Operating Temperature

Range

description

The TPA2001D2 is the third generation 5-V class-D amplifier from Texas Instruments. Improvements to

previous generation devices include: lower supply current, lower noise floor, better efficiency, four different gain

settings, smaller packaging, and fewer external components. The most significant advancement with this device

is its modulation scheme that allows the amplifier to operate without the output filter. Eliminating the output filter

saves the user approximately 30% in system cost and 75% in PCB area.

The TPA2001D2 is a monolithic class-D power IC stereo audio amplifier, using the high switching speed of

power MOSFET transistors. These transistors reproduce the analog signal through high-frequency switching

of the output stage. The TPA2001D2 is configured as a bridge-tied load (BTL) amplifier capable of delivering

greater than 1 W of continuous average power into an 8-W load at less than 0.6% THD+N from a 5-V power

supply in the high fidelity range (20 Hz to 20 kHz). With 1 W being delivered to an 8-W load at 1 kHz, the typical

THD+N is less than 0.08%.

A BTL configuration eliminates the need for external coupling capacitors on the output. Low supply current of

8 mA makes the device ideal for battery-powered applications. Protection circuitry increases device reliability:

thermal, over-current, and under-voltage shutdown.

Efficient class-D modulation enables the TPA2001D2 to operate at full power into 8-W loads at an ambient

temperature of 85°C.